Tuesday, July 30, 2013

The color ink printing color difference causes analysis

To increase the overall effect of the packaging, a lot of clients in the design of packaging, will design a larger area of the color, if not good control in the printing process, will greatly reduce the grade of the product, thereby affect the competitiveness of products in the market. So from the quality control of raw materials and operators at the time of printing technology quality is strictly required.
1. Each batch do not match the color or the same batch
(1) in the proofing for the first time, be sure to put the blade Angle, ratio of ink to do detailed records.
(2) the printing before control, due to the color of ink is commonly own, so make sure the ink bias, accuracy ratio, ink plate, stir the ink stick, ink pump to clean up. The previous use of the rest of the ink to add right amount to the new ink, according to the record set scraper, ink viscosity.
(3) the printing must control the ink viscosity, suggested that to increase artificial measurement frequency or degree of automatic tracking regulator.
2. Transfer of ink uneven
(1) on the palette should minimize ink varieties, can use two colors out of don't three colors, different manufacturers of ink can't mix, mix well after fully stir well, and add the appropriate butanone dissolve. Join solution should be slowly join and stir evenly, so as not to impact caused solubility with solution, printing ink structure, resulting in the transfer.
(2) reduce the scraper blade pressure and Angle (more color) is applied to the transition.
(3) water lines
Increase the ink viscosity, because the color version of sunken into the deep, generally is 30 ~ 35 um, so ink stained through low there will be water lines, and suggested that the 120 ~ 150 m/min speed use 22 seconds to 20 seconds (ChaEn 3 cups)
3. The indentation diagonal
(1) reduce the impression roller pressure.
(2) glial soft embossing roller, change good embossing roller, hardness of 75 shaw.
4. The peel strength is not enough and with speed
Because, the color of the packaging commonly 40% ~ 60%, even more, so the color of the peel strength must be better, could be controlled from the following aspects.
(1) substrate surface tension to conform to the requirements, not less than 38 dyne/cm.
(2) choose suitable for base material type of ink.
(3) choose a lower surface tension of solution, to reduce the surface tension of the ink system, so as to improve the wettability of the base material.
(4) increasing oven to heat and air, if the oven heat, air volume is small, the color of ink on the big, cause adhesion and stripping is not enough.
In brief, to control the color to printing, also need to seriously summarizing, improve operator awareness of product quality, seriously good every barrier, achieve excellence. (Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China

Monday, July 29, 2013

Print color bad analysis of the causes and countermeasures

Print color bad causes and coping methods:
1. The ink is not balance, try to at least as far as possible when on water and a small amount of ink to print out the highest quality.
2. Caused by alkaline paper, usually for alkaline paper coatings, when printing to be overly "washing", the wetting fluid is alkaline, cause on the plating section with ink. Weak acid can be added in the wetting liquid, keep the pH is between 6 to 7.
3. The adjustment depends on version of water roll is not correct, check whether both sides pressure on average.
Version 4. Depending on the ink roller pressure is not correct, it shall keep in contact stripe width of 3 mm (3/16).
5. Wetting liquid excessive evaporation, printing room temperature should be about 22 c (72 f) and relative humidity between 55% ~ 65%.
6. Ink emulsification, replace the quality difficult ink emulsification.
(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China

Sunday, July 28, 2013

Printing Industries of America Announces Formation of Diverse Tax Coalition

Washington, D.C., July 23, 2013—Printing Industries of America today issued the following statement regarding the formation of the Coalition for Fair Effective Tax Rates, intended to focus the 113th Congress on passing necessary tax reform legislation.
Printing Industries of America today announces the formation of the Coalition for Fair Effective Tax Rates (CFETR), collectively representing about 500,000 businesses ranging from corporate rate payers to small mom-and-pop printers paying individual tax rates. As a founding member, Printing Industries of America will work to educate Congress on the concept that tax reform should be viewed through the lens of effective tax rates—the amount of taxes businesses actually pay. Rather than promote tax preferences, CFETR will keep effective tax rates front and center for lawmakers and highlight the inequities of the code for businesses of all sizes.
“With Printing Industries of America being a leading member of the newly formed Coalition for Fair Effective Tax Rates, printing and graphics communication companies will have a seat at the table throughout the debate in the House and Senate regarding tax reform,” said Lisbeth Lyons, Vice President of Government Affairs for Printing Industries of America. “Directing the dialogue on Capitol Hill for tax reform in the 113th Congress is an essential tool for ensuring the Government does not pick winners and losers among industry sectors in the tax code. Both the House and Senate have laid the groundwork to introduce legislation, and the involvement of this coalition and the business community is critical in pushing real reform across the finish line.”
The CFETR intends to establish effective tax rate fairness as the best metric to form policy and analyze how it would impact different business types and industries. “Through the coalition, we will promote tax reform and simplification that broadens the tax base and lowers the tax rates for corporations, pass-through entities, and individuals. As Congress considers a major tax code overhaul, it’s important that key committees hear how policies crafted on Capitol Hill would affect the printing industry in a practical way,” said Lyons. “We look forward to working through the coalition to advance this critical debate on tax reform and shape the discussion to encourage job creation and economic growth with lower effective tax rates.” (Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China

Sunday, July 21, 2013

Brochure printing design and color combinations

Pictorial printing design color processing: color are important elements in the cover design, the first impression is some cover color. And in the case of far away, only good colours to attract readers. Color used to consider the needs of the content, use different color contrast to express the effect of different content and ideas. Coordinated, in contrast to three configuration it is advisable to each other, make contrast color unified in coordination.
The colour of the cover design process is design is important. Appropriate color expression and artistic processing, can be produced in readers' visual luminous effect. Color used to consider the needs of the content, use different color contrast to express the effect of different content and ideas. Coordinated, in contrast to three configuration it is advisable to each other, make contrast color unified in coordination. The colors of the title on the cover has to have a certain weight, such as purity is not enough, will not be able to produce significant luminous effect. In addition to painting the color for cover design, decorative colors are available. Literary book cover design colour do not necessarily apply textbooks, textbooks, theory books cover color is not suitable for children's books. To dialectical view on the meaning of the color, not metaphysics to use.
In general design children's publications, for young children and delicate, pure, naive, lovely character, often tonal processing into high-profile, less variety of contrast, emphasize the soft feeling; Female periodicals color can be according to the characteristic of the female, choose the color of the gentle, charming, and elegant series; Sports magazine color emphasizes the impact of the stimulus, contrast, the pursuit of color; And arts magazine color requires has rich connotation, have depth, avoid by all means is frivolous, vulgar; The color of popular science books can emphasize the mystery; To trendy fashion magazine colour, rich individual character; The colour of professional academic journals should solemn, serious, elegant, authority, should not be emphasized that high purity of hue contrast.
In addition to coordinating color configuration, also pay attention to colorific contrast relation, including hue, purity, brightness contrast. Cover no hue contrast of changes in temperature, will feel the lack of angry; Cover has no depth contrast, lightness will feel dull and smothering; No purity stands in stark contrast, on the cover will feel peace in the ancient customs. We should cover in colour in the design of master, purity, hue, lightness and use relationship to get to know these three have disadvantages on the cover and find the reason, in order to improve the color.
It is not difficult to see the color for the cover design is very important. Gold printing group think to choose the appropriate colors in the picture album cover design book subject, or to determine the cover some basic and tonal, the theme of the book is called for a degree of certainty, and knowledgeable of all sorts of color of attribute. (Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China

Wednesday, July 17, 2013

The printing color of light color ink mixing method

Light-coloured ink is to add thinner in the original ink deployment into the ink, or give priority to with white ink add other color is blended into the ink. The match method is thinner or white ink is given priority to, other color is complementary principle, the first scale take appropriate ratio of thinner or white ink, add in and the color, so that side stir uniform ink, observe changes hue, dilute degree is appropriate, by comparing with original paper scraping the ink samples, switch to the right.
Dilute the color from color to distinguish, is divided into primary, three, and multicolor. All with color ink mixing diluent, add in as long as the original color. But if three, multicolor, lack of ink experience, had better look about the original ink deployment into the color of dark ink, then add the thinner.
Mixing light ink, master good ink dilution degree is an important technical link. If the dilution ratio is not enough, will cause the ink roller surface enough ink, the print layout of ink used flowers, dry ink layer is not solid, colour is not bright; If ink diluted too much, only increase the ink layer thickness can achieve printing the color, so that ink paste version, easy to make the layout of a low profile area appears confused depth level. At the same time, also easy to cause print bottom phenomenon.
Deployment of light-coloured ink according to product quality requirements, and the characteristics of paper, choose appropriate to the ink and thinner. Such as offset paper printing ink printed general with 10 products, can choose thinner 915 (d), or 554 transparent oil.
If printing coated paper adopts 05 type ink printing fine products, should choose 05-90 light pulp removed light agent or 8011, 8015. Blending light-colored ink should also note that for light resistance, oxidation resistance, easy to change color of the original ink, try to avoid to allocate light color, lest cause the color is not stable.
In addition, because white ink than major, in addition to have covered the requirements and need to color and a small amount of add some used to invoke, as far as possible don't have white ink diluent. In order to prevent weight problems such as improper folding color, rub off.
When the deployment of ink, but also should pay attention to the proportion of different ink, such as the use of lead chrome yellow ink than major and peacock blue with green ink, put for a long time, so the "floating color", if the use made of organic yellow pigment yellow ink to deployment, won't appear the phenomenon.
To sum up, only to learn to master color knowledge and understanding of printing ink, auxiliary materials relevant situation and use characteristics, to scientifically allocate out all sorts of color, in order to meet the requirements of improving printing quality and production efficiency. (Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China

Monday, July 15, 2013

Inkjet printing technology as variable data printing market main force

Variable data printing market in 2012, produced 656.756 billion copies (A4), by 2017 is expected to increase to 853.097 billion printed sheet. Released at the same time, the report also using different printing method for variable data printing production related data: among them, using traditional printing technology of the production is expected in the next five years at a 0.5% compound annual growth rate of negative decline; Adopt electrostatic printing production is expected to 1.5% compound annual rate of growth, using ink jet printing technology production fastest growth over the next five years, compound annual growth rate is expected to be 14.2%. Global market for variable data printing production ratio in total of the whole printing market will grow from 8.2% in 2012 to 14.2% in 2017.
In each region of the report at the same time for the global variable data printing market has also carried on the detailed investigation and study. According to the survey found that in North America and Western Europe is accounted for the largest share of the global variable data printing market, its in the field of direct mail printing, and other files to print using digital printing technology level is much higher than the rest of the world level, especially in the area of inkjet printing technology. In addition, in emerging markets such as eastern Europe, the Middle East and Latin America, variable data digital printing production also. Although the application of digital printing technology in these areas is not very widely, but the growth rate is very alarming, the annual growth rate at 20%.
In recent years, high speed, high quality inkjet printing technology become the most powerful technology affect the variable data printing market. As mentioned in the report, if use other technologies of variable data printing production will not increase, but the ink jet printing technology market growth is inevitable, and will be a double-digit growth, the future of variable data printing output is the result of ink-jet printing technology most in the future.
Specific areas, in 2012, the largest contribution to the global market for variable data printing production of the first is the direct mail market, a total of about 264 billion printing (A4), in the next five years is expected to grow by 19%. But in the growth of the market won't be plain sailing, like other difficulty printing market field, digital through the variable data printing market, especially the notes, checks, financial transactions, and direct mail marketing. (Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China

Sunday, July 14, 2013

Book Printing Service’s Final Source,Printing Knowledge, Printing in China

book printing requires the use of robust techniques to publish books that meet the standards of the current generation. Ideally, each household should have access to books at all times. There was a significant increase in books published in recent years, thanks to new technology that allows mass production. Before the printer book was presented to mankind in the 19th century, printing and book publishing has been a very slow phase, limiting the readership for the elite and powerful. No more. There is no limit to the number of books can be produced more than the world population is growing at an alarming rate. Anyone can produce a book as long as it meets the standards. Some of the different services are book printing – Book Printing and Binding – Book printing is the production of copies of a book loaded with the same content. Binding attaches all the pages of books to produce a single document. The method used to link a product depends on the strength of the final product. A strong bonding material ensures that documents remain intact longer, to help you save on the cost of re-binding in the near future or buying a new copy completely. Softcover –For this type of association, the publisher uses a wire spiral, as to reach the pages of the book. This is one of the most commonly used today, binding books. It also happens to be the cheapest. The cost of printing of books is much lower when it is a spiral binding and will save much money. Booklet binding (saddle stitching) – This method is generally applied to small booklets that fewer pages. An example of this type of association is the notebooks and diaries, that the connection is made with points using a suitable thread, such as pages can not tear easily. Different types of hard-cover book binding – It is recommended that hard cover should be used to bind books. Hard covers will keep the inside of the book clean so it saves the pages more easily torn. Books require proper maintenance or they can be easily damaged. This is why the books should not be on the shelves wet as documents can easily absorb water damage to books. There are also other forms of association, as blockage of leaf and several other types of finish. (Gold Printing Group) Book Printing
Printing in China
Notebooks Printing
Printing in China

Thursday, July 11, 2013

China print 2012 foreign processing trade year-on-year growth of 13.5%

Recently, we have heard from China printing foreign processing trade news conference, in 2012 China foreign printing industry overall development a contrarian growth of processing trade, and foreign processing trade has become an important force pull China printing for growth. National press and publication administration of radio, film and print issue of the relevant person in charge of management issued at the meeting in the Chinese printing industry on the latest trends in foreign trade processing.
The foreign processing trade rapid growth in Yangtze river delta
It is understood that in 2012, China's printing industry the overall size is close to second place in the world, China has become the important processing base printing. Among them, the foreign processing trade for 77.204 billion yuan, 13.5% year-on-year growth, printing foreign processing trade has accounted for 1.4% of the national processing trade exports. Under the background of global demand for major economies remain weak, China's printing industry foreign processing trade the growth rate of 10%, far higher than the national processing trade grow is realized.
State general administration of press and publication, radio and television print issue of the relevant person in charge of management, said China's printing industry the achievements of foreign processing trade is caused by many factors, mainly reflects in, in recent years, China's printing industry the immanent quality of foreign processing trade has been greatly promoted. , for example, with a good geographical advantage and strong ability of production technology, the Yangtze river delta (including Shanghai, jiangsu and zhejiang) printing industry in recent years, active integration into the global industrial chain, foreign processing trade to the rapid growth of the total amount of its accounts for the proportion of 25%.
Statistics show that 2012 older river delta printing foreign processing trade for 19.075 billion yuan, up 11.4% on the previous year. Gradient at the same time, the central region to undertake coastal areas transfer success, look from the data, in 2012, the printing industry in guangdong province foreign processing trade by accounted for over 70% of the national long-term, down to 56.7%; In hunan, jiangxi, and anhui province has achieved rapid growth, the previous year growth of 36%, 28% and 20%, respectively, three printing foreign processing trade accounts for the proportion increased from 1% in 2010 to 7% in 2012.
Private and foreign capital enterprise into foreign processing trade important strength
In addition a set of data is also worth attention, with the rapid development of private economy, private enterprises and foreign-funded enterprises become an important force in China's printing industry foreign processing trade, backbone state-owned printing enterprise "going out" pace more solid.
In 2012, is engaged in the printing industry in guangdong province foreign trade and processing of private enterprises has reached 38%, the foreign capital enterprise ratio decreased to 61%; Shanghai 291 printing enterprises engaged in the foreign trade processing, among them 197 are private enterprises, accounting for 67%; The national total of more than 5000 printing enterprises engaged in external processing trade, more than 60% are privately operated enterprise.
In private and foreign capital enterprise steady development at the same time, state-owned printing enterprise also to enter the Chinese printing industry backbone outward processing trade. Like the jiangsu phoenix xinhua printing co., LTD., nearly two years solid pace of "going out", has been with the United States, Britain, Italy, Argentina and more than 10 countries such as kazakhstan relevant institutions established the processing trade business relations.
National press and publication administration of radio, film and print issue of the relevant person in charge of management, said on international orders virtually also improved the whole quality of the printing enterprises in China, Chinese seal through foreign processing trade enterprises the window to understand the world and improve myself.
According to introduction, in order to promote the healthy development of printing industry foreign processing trade, state general administration of press and publication, radio and television with the state administration of taxation has issued a "about printing books outside the announcement of VAT applicable tax rate problem. Announcement regulation, from April 1 this year, the domestic printing enterprises approved by the competent department of press and publication of the printing and printing USES the international standard book number (isbn) reprogramming of foreign books, applies preferential VAT rate of 13%. In addition, Shanghai international printing week held, also is the administration and Shanghai metro transit function, active service, to promote Chinese printing enterprises "going out" action. (Gold Printing Group
Book Printing
Printing in China
Notebooks Printing
Printing in China