http://www.printing-in-china.cn/shownews.asp?id=2070
Recently, the European Union issued the latest edition of the food packaging and printing ink guide ", with the European Union to keep food contact materials of the consistency of the new regulations. The guidelines for all food contact materials and products on the food contact on the surface of printing ink, and use paint and coating paper proposed a series of quality requirements and control measures requirements.
Specific include:
A, printing ink and the selection of raw materials of the colorant to comply with the requirements, cannot use the cancer mutations and reproductive toxicity and REACH the limit of the regulation of poisonous and harmful material;
Second, printing ink material move to the quantity of food health hazard, cannot lead to not food composition occur can't accept change or to the sensory characteristics of the food caused deterioration;
Third, in accordance with the requirements of good production specifications instruction production;
Four, printing ink can't direct contact with food, not on food contact surface cause pollution and among them with specific material transfer amount to to the regulations. At the same time, because of food with plastic products is the most main materials such as ink of one of the purposes, the guide emphatically printing ink with the European Union to keep the latest plastic products regulations (EU) No 11/2011 of the compliance make a series of instructions and rules.
Printing ink in food packaging and other commodities on the application extensive, its chemical composition complex, and the easy pollution food, safety risk bigger, but because the material such as ink belongs to accessories, the dosage of the total amount of the material than also is relatively small, enterprise to its security requirements and management is often neglect. If some enterprise production plastic cup and other products, think for printing products outside the walls of the trademark, the design content of the ink painting not contact with food, and its quality demand is not high, in the procurement not realize according to food safety requirements for quality control of the product in thermal transfer and packing in the link also lack the necessary risk consciousness and protective measures, plastic cups and other products in the process of stacked likely for reasons such as sticky stick to food contact surface cause pollution.
The inspection and quarantine expert advice from the following three aspects of enterprises, to improve product safety, avoid trade risk:
One is of enterprise internal as soon as possible that purchased product such as printing ink, the coating quality testing. The above guidelines and not in conformity with the requirements of the regulations raw materials to be cleared in time, avoid penny wise and pound foolish, for printing ink or coating caused the whole batch of products any quality problems. At the same time, in the raw materials management should be according to the guidelines call for as soon as possible will ink accessories into the enterprise product management aspect of trace.
2 it is grasps "the consumer products safety no small" business philosophy, and improving risk awareness. In the consumer to food safety requirements under the background of increasing ascension, all and food products related to business operators must stop thinking inertia, consciously strengthen to the developed countries and regions related food contact materials regulations and requirements of the collect and interpret, risk prevention work will lead, enterprise in quality management work take initiative.
Three is to strengthen the communication with customers foreign, and strengthen training to the employees. For possible sticky glue or cross contamination with ink or coating product in ink printing and semi-finished products such as inspection link put an end to fold the improper operation, in the packaging link can be a single product such as the NiLongDai through measures to avoid the mutual pollution, effective guarantee the quality and safety of finished products.
(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Tuesday, January 31, 2012
Monday, January 30, 2012
2012 the boom of paper analyzes opportunity lack integrity - Printing in China | Book Printing
http://www.printing-in-china.cn/shownews.asp?id=2069
2012 paper industry lack integrity opportunity. From the long cycle look, paper shares already have a certain configuration value, the investment value will gradually revealed.
The national development and reform commission, the labor department, the state forestry administration letter jointly issued by the paper industry development "1025" plan ". To speed up the traditional paper industry to sustainable development of modern paper industry transformation, and the planning of product structure, improve the optimization of industrial concentration, improve the level of equipment, to reduce the consumption of resources, reduce pollution emission, backward production is proposed as requirements.
Countries that gold securities, the "planning" desalination quantitative index, with the thinning policy. The planning of the quantity, the main point is accused of the structure and consumption. And the domestic ZhiJia already near the bottom, down the space is limited. With the relaxation of the monetary policy and economic stabilising, ZhiJia may in the second quarter, rebound in period. From the long cycle look, 2012 years to have a paper shares already configuration of the value, the investment value will gradually revealed. Suggestions on benefit from behind productivity, competitive out high quality leading enterprises.
However, the Great Wall securities in paper industry 2012 investment strategy report in 2012, said the paper industry will still vulnerable pattern, bargaining power is weak, the boom difficult have greatly improved, profits are down about 15% in 2011. Thus, in 2012 paper industry lack integrity opportunity. Suggestions on downstream demand is stable, the price has the viscous, in 2012, pulp, paper price low operation is expected to get excess profits of the company.
Haitong securities also think, paper industry by the recent focus on release capacity, and needs no substantial improvement, the boom of industry in the short term is difficult to ascend. Its advice continue to focus on backward production policy pushing of consolidation in the industry, in this case the company leading advantage will increasingly clear, such as the sun paper, ChenMing paper. In the cost of the decline of the background, the short-term can choose bargaining ability of downstream individual stocks, such as the clean in soft, may cost down in the realization of ascension in dramatic performance.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
2012 paper industry lack integrity opportunity. From the long cycle look, paper shares already have a certain configuration value, the investment value will gradually revealed.
The national development and reform commission, the labor department, the state forestry administration letter jointly issued by the paper industry development "1025" plan ". To speed up the traditional paper industry to sustainable development of modern paper industry transformation, and the planning of product structure, improve the optimization of industrial concentration, improve the level of equipment, to reduce the consumption of resources, reduce pollution emission, backward production is proposed as requirements.
Countries that gold securities, the "planning" desalination quantitative index, with the thinning policy. The planning of the quantity, the main point is accused of the structure and consumption. And the domestic ZhiJia already near the bottom, down the space is limited. With the relaxation of the monetary policy and economic stabilising, ZhiJia may in the second quarter, rebound in period. From the long cycle look, 2012 years to have a paper shares already configuration of the value, the investment value will gradually revealed. Suggestions on benefit from behind productivity, competitive out high quality leading enterprises.
However, the Great Wall securities in paper industry 2012 investment strategy report in 2012, said the paper industry will still vulnerable pattern, bargaining power is weak, the boom difficult have greatly improved, profits are down about 15% in 2011. Thus, in 2012 paper industry lack integrity opportunity. Suggestions on downstream demand is stable, the price has the viscous, in 2012, pulp, paper price low operation is expected to get excess profits of the company.
Haitong securities also think, paper industry by the recent focus on release capacity, and needs no substantial improvement, the boom of industry in the short term is difficult to ascend. Its advice continue to focus on backward production policy pushing of consolidation in the industry, in this case the company leading advantage will increasingly clear, such as the sun paper, ChenMing paper. In the cost of the decline of the background, the short-term can choose bargaining ability of downstream individual stocks, such as the clean in soft, may cost down in the realization of ascension in dramatic performance.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Sunday, January 29, 2012
2011 the most remarkable wrapped in printing field five technology | Book Printing - Gold Printing Group
http://www.printing-in-china.cn/shownews.asp?id=2068
In 2011, the total output value of printing market will exceed $720 billion, China printing market output will reach to 65.934 billion us dollars, accounting for 9.16% of total global printing market. Global printing market will present the apparent "towards the east trend" with China, India for engine pulled Asia printing market will be strong growth. As early as in 2006, China has replaced Germany and the UK as the world's third largest printing market.
In the last ten years, along with the high speed development of economy manufacturer information, our country has been to the packaging industry is growing at more than 10%. In 2008, packaging and printing gross industrial output value reached 155 billion yuan, more than 2007 yuan of 140 billion grew by 10.71%, 32.73% of the total output value of the national printing industry. By April 30, 2009, the national have all kinds of printing 101857 enterprises, of which engaged in packaging decoration printed materials enterprise 43298, occupy 42.5%
With the economic and social progress and China printing and packaging industry development and growth, we faced with the market environment also has undergone earth-shaking changes, sum up can be divided into five:
1, "a low carbon economy" become main melody;
2, "food packaging security" become the focus;
3, several relevant standards formal implementation;
4, cost pressure increase;
5, large end user requirements "low quality".
In such a market environment, to "a low carbon economy" model development, pay more attention to the cost control and pay more attention to the safety of the packing become the packaging industry technology development in the three major development direction. In "a low carbon economy" in the backdrop, low carbon environmental protection product will be popular, and is expected to become the mainstream market, ROM the fai think, packaging and printing industry also ought to be in development in a low carbon economy to undertake the responsibility. In addition, those who can help packaging and printing enterprise to reduce loss, reduce the waste, improve the yield of technology will adore, become the hot spot of the investment in the next few years.
In ROM the fai opinion, offset printing online LengTang technology; Drum paper hot stamping technology; For long stretch compound printing avoid laser edition sewing technology; Laser logo embossed on transfer of technology and the combination of printing technology is wrapped in the most notable printing field five technology.
1, offset printing online LengTang technology
The traditional hot stamping need special metal hot plate, through the heating the way the pressure will need the stamping material transfer to print material surface, speed, relatively slowly lose paper, it is difficult to and offset printing solid online hot hot to add. Offset printing technology in normal temperature is LengTang online conditions, through the binder will need to printing and printing paste to the surfaces. Its realization is directly USES the original two units of the offset printing machine, a set of printing fillet, a group of transfer metal hot stamping foil.
Advantage: printing speed, high efficiency; A complete printing and paper go metal foil transfer printing digital printing, alignment precision high; LengTang of plate can be offset printing plate resolution of the resolution, can hot stamping fine graphic; At normal temperature, without heating, can be in sensitive to temperature material surface decoration; To save energy.
2, drum paper hot stamping technology
Drum paper cutting machines in our country in the tobacco package market has made mature application, and will be along with the market for high efficiency and high quality decoration live a demand increase, will also have a greater development. At present, the application is more mature enterprises: changde jinpeng printing Co., LTD, yunnan remittance of the packaging and printing Co., LTD, yunnan yuxi printing Co., ltd., chongqing macro sound printing Co., LTD, yunnan Yang color printing Co., LTD. And the dongguan intelligence source color printing Co., LTD.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
In 2011, the total output value of printing market will exceed $720 billion, China printing market output will reach to 65.934 billion us dollars, accounting for 9.16% of total global printing market. Global printing market will present the apparent "towards the east trend" with China, India for engine pulled Asia printing market will be strong growth. As early as in 2006, China has replaced Germany and the UK as the world's third largest printing market.
In the last ten years, along with the high speed development of economy manufacturer information, our country has been to the packaging industry is growing at more than 10%. In 2008, packaging and printing gross industrial output value reached 155 billion yuan, more than 2007 yuan of 140 billion grew by 10.71%, 32.73% of the total output value of the national printing industry. By April 30, 2009, the national have all kinds of printing 101857 enterprises, of which engaged in packaging decoration printed materials enterprise 43298, occupy 42.5%
With the economic and social progress and China printing and packaging industry development and growth, we faced with the market environment also has undergone earth-shaking changes, sum up can be divided into five:
1, "a low carbon economy" become main melody;
2, "food packaging security" become the focus;
3, several relevant standards formal implementation;
4, cost pressure increase;
5, large end user requirements "low quality".
In such a market environment, to "a low carbon economy" model development, pay more attention to the cost control and pay more attention to the safety of the packing become the packaging industry technology development in the three major development direction. In "a low carbon economy" in the backdrop, low carbon environmental protection product will be popular, and is expected to become the mainstream market, ROM the fai think, packaging and printing industry also ought to be in development in a low carbon economy to undertake the responsibility. In addition, those who can help packaging and printing enterprise to reduce loss, reduce the waste, improve the yield of technology will adore, become the hot spot of the investment in the next few years.
In ROM the fai opinion, offset printing online LengTang technology; Drum paper hot stamping technology; For long stretch compound printing avoid laser edition sewing technology; Laser logo embossed on transfer of technology and the combination of printing technology is wrapped in the most notable printing field five technology.
1, offset printing online LengTang technology
The traditional hot stamping need special metal hot plate, through the heating the way the pressure will need the stamping material transfer to print material surface, speed, relatively slowly lose paper, it is difficult to and offset printing solid online hot hot to add. Offset printing technology in normal temperature is LengTang online conditions, through the binder will need to printing and printing paste to the surfaces. Its realization is directly USES the original two units of the offset printing machine, a set of printing fillet, a group of transfer metal hot stamping foil.
Advantage: printing speed, high efficiency; A complete printing and paper go metal foil transfer printing digital printing, alignment precision high; LengTang of plate can be offset printing plate resolution of the resolution, can hot stamping fine graphic; At normal temperature, without heating, can be in sensitive to temperature material surface decoration; To save energy.
2, drum paper hot stamping technology
Drum paper cutting machines in our country in the tobacco package market has made mature application, and will be along with the market for high efficiency and high quality decoration live a demand increase, will also have a greater development. At present, the application is more mature enterprises: changde jinpeng printing Co., LTD, yunnan remittance of the packaging and printing Co., LTD, yunnan yuxi printing Co., ltd., chongqing macro sound printing Co., LTD, yunnan Yang color printing Co., LTD. And the dongguan intelligence source color printing Co., LTD.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Sunday, January 15, 2012
Short board effect highlight paper industry development green by drag - Printing in China | Book Printing
http://www.printing-in-china.cn/shownews.asp?id=2066
On dec. 15, 2011, in the PRC held the "2011 paper industry top energy conservation and emissions reduction seminar, national and local environmental protection department, industry association, the media, the representative of the enterprises with advanced paper experts agree, Chinese paper development has entered a very period, the industry should survive and healthy development, need inside and outside force combined with strong backward production capacity.
Green industry development, behind productivity dragging its heels
At the symposium, protecting center director of north China she said: "in 2000, China's paper emissions of the national industrial emissions COD COD, 44% of the total in 2005 to 32% in 2010 and to 20.3%, the proportion of paper COD drop. But now paper still is our country industry COD emitters. She set 1025 'in' energy saving and emission reduction policy, the paper carry out alone. Because paper wastewater. If emissions through technical innovation and transformation, waste water discharge of the decline of the total paper space will be big."
Paper overall impression to people is not too environmental protection. Should say, in the past, the paper of the enterprises of average size are small, process is relatively backward, treatment facilities are not perfect, and environmental protection work is very backward. But after years of development, industry produced very big change, environmental protection outstanding enterprise is more and more, in water, solid waste comprehensive utilization are very well. She released from departments of various materials to see, in recent years although paper production increases a lot, but pollutants has fallen than in the past.
Over the past few years, China paper industry development is fast, and other countries was basically in the stable state. At present, the development of the new advanced technology equipment, most of the use of the China. So, China has a great part of the energy consumption of the unit product production capacity, and emissions of pollutants, and water quantity and quality are is the world's leading.
In 2010, our country has the scale above 3724 enterprises of paper, including a large enterprise and home, 0.89%, medium-sized enterprise 388, occupy 10.42%, small enterprise 3303, occupy 88.69%; Large enterprise accounting for the industry's main 26.75% of total revenue, medium-sized enterprises 34.6%, small business accounted for 38.65%. And the developed countries in the world, China's paper in the number of large enterprise scale and the existence of a big gap. But large enterprise in product quality, consumption quotas, emission load, etc, can achieve or close to the international advanced level. And the proportion of too great behind productivity product quality, consumption and pollution load are and the advanced international level a big gap there. This part of the production accounts for about 35% of the industry total, COD emissions has accounted for 47% of the total emissions industry, is the key work of energy conservation and emission reduction.
This summer, journalists and Finland, Germany paper the developed countries of the professional reporter interviewed the asia-pacific sen bo. Facing the world's top equipment and environmental protection level of the world's leading factories, foreign journalists very surprised. Once before reporters to some paper developed countries to interview, contrast that China's paper is not short of with the world's advanced level of enterprise, but the average low than others. The reason is backward productivity dragging its heels.
Backward productivity need inside and outside force combined
According to the report, the end of 2011, the workers believe department issued "1025" during the industrial field 19 key industries backward production goals and tasks, including paper for 15 million tons, compared with the "eleventh five-year plan", the paper backward productivity tasks rate of 130% increase.
Facing such a heavy task, industry?
The guest attending the forum has a consensus-the industry need inside and outside force combined with strong backward production capacity.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
On dec. 15, 2011, in the PRC held the "2011 paper industry top energy conservation and emissions reduction seminar, national and local environmental protection department, industry association, the media, the representative of the enterprises with advanced paper experts agree, Chinese paper development has entered a very period, the industry should survive and healthy development, need inside and outside force combined with strong backward production capacity.
Green industry development, behind productivity dragging its heels
At the symposium, protecting center director of north China she said: "in 2000, China's paper emissions of the national industrial emissions COD COD, 44% of the total in 2005 to 32% in 2010 and to 20.3%, the proportion of paper COD drop. But now paper still is our country industry COD emitters. She set 1025 'in' energy saving and emission reduction policy, the paper carry out alone. Because paper wastewater. If emissions through technical innovation and transformation, waste water discharge of the decline of the total paper space will be big."
Paper overall impression to people is not too environmental protection. Should say, in the past, the paper of the enterprises of average size are small, process is relatively backward, treatment facilities are not perfect, and environmental protection work is very backward. But after years of development, industry produced very big change, environmental protection outstanding enterprise is more and more, in water, solid waste comprehensive utilization are very well. She released from departments of various materials to see, in recent years although paper production increases a lot, but pollutants has fallen than in the past.
Over the past few years, China paper industry development is fast, and other countries was basically in the stable state. At present, the development of the new advanced technology equipment, most of the use of the China. So, China has a great part of the energy consumption of the unit product production capacity, and emissions of pollutants, and water quantity and quality are is the world's leading.
In 2010, our country has the scale above 3724 enterprises of paper, including a large enterprise and home, 0.89%, medium-sized enterprise 388, occupy 10.42%, small enterprise 3303, occupy 88.69%; Large enterprise accounting for the industry's main 26.75% of total revenue, medium-sized enterprises 34.6%, small business accounted for 38.65%. And the developed countries in the world, China's paper in the number of large enterprise scale and the existence of a big gap. But large enterprise in product quality, consumption quotas, emission load, etc, can achieve or close to the international advanced level. And the proportion of too great behind productivity product quality, consumption and pollution load are and the advanced international level a big gap there. This part of the production accounts for about 35% of the industry total, COD emissions has accounted for 47% of the total emissions industry, is the key work of energy conservation and emission reduction.
This summer, journalists and Finland, Germany paper the developed countries of the professional reporter interviewed the asia-pacific sen bo. Facing the world's top equipment and environmental protection level of the world's leading factories, foreign journalists very surprised. Once before reporters to some paper developed countries to interview, contrast that China's paper is not short of with the world's advanced level of enterprise, but the average low than others. The reason is backward productivity dragging its heels.
Backward productivity need inside and outside force combined
According to the report, the end of 2011, the workers believe department issued "1025" during the industrial field 19 key industries backward production goals and tasks, including paper for 15 million tons, compared with the "eleventh five-year plan", the paper backward productivity tasks rate of 130% increase.
Facing such a heavy task, industry?
The guest attending the forum has a consensus-the industry need inside and outside force combined with strong backward production capacity.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Thursday, January 12, 2012
The printing industry association was approaching 125 anniversary celebration | Book Printing
http://www.goldprinting.cc/shownews.asp?id=2029
Since its inception in 1887, the United States Printing industry association (PIA, Printing Industries of America) will in 2012 as the 125th anniversary celebration. In order to celebrate the milestone is a special day of commemoration, the association LOGO and the site has been revised to upgrade. The new web site is not only highlight the development history of the organization, and will be the future trend to printing in-depth analysis, and at the same time of the printing industry experts interview video and audio materials will also be in the new web site to display. It is reported, anniversary celebration ceremony in GRAPH EXPO 2012 will be held during the exhibition.
"Learning from the teacher of the car. After the printing partners with the growth and development, we are very happy to review of the history of the long, from 125 in the process of the development of the mining success experience." The printing industry association chief executive Michael Makin said.
The printing industry association is the beginning of the printing industry to ease the competition between labor disputes and set up problems, at first association name for United Typothetae of America (UTA). After 125 years of development, at present, the association for printing industry can be provide technical development, training, the situation analysis and publicity, etc.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Since its inception in 1887, the United States Printing industry association (PIA, Printing Industries of America) will in 2012 as the 125th anniversary celebration. In order to celebrate the milestone is a special day of commemoration, the association LOGO and the site has been revised to upgrade. The new web site is not only highlight the development history of the organization, and will be the future trend to printing in-depth analysis, and at the same time of the printing industry experts interview video and audio materials will also be in the new web site to display. It is reported, anniversary celebration ceremony in GRAPH EXPO 2012 will be held during the exhibition.
"Learning from the teacher of the car. After the printing partners with the growth and development, we are very happy to review of the history of the long, from 125 in the process of the development of the mining success experience." The printing industry association chief executive Michael Makin said.
The printing industry association is the beginning of the printing industry to ease the competition between labor disputes and set up problems, at first association name for United Typothetae of America (UTA). After 125 years of development, at present, the association for printing industry can be provide technical development, training, the situation analysis and publicity, etc.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Wednesday, January 11, 2012
Heidelberg peak in 2012 drew and equipment will be reinventing the top - Printing in China | Book Printing
http://www.printing-in-china.cn/shownews.asp?id=2063
2012 drew ba during the exhibition, the Heidelberg group (Heidelberg) will publicly display in the flip printing mode printing speed up to 18000 zhang/hours of speed the XL105 printing machine. The printing presses are targeted hope realizing lean production printing company. In bashan on it will show druid in lean manufacturing (HEI Productivity) classification the theme of the commercial printing area to display. Batch production first printing machine has identified in 2012 will be July delivery. So far, Heidelberg in large commercial printing company's top performance product combination to get further expansion, the company every year to printing more than 40 million copies, feature up to 60 million, and their capacity bottlenecks have experience greatly. In the past, such printing machine's top speed is 15000 zhang/hour. Through a go finish double-sided printing paper, combined with the highest automation and extremely convenient operation, print production become more economic and effective, greatly improving the business printing the competition ability of the enterprise. This type of high-performance printer user can either in don't improve the human cost based on the increase in production capacity, or keep existing production capacity in based on the number of reduce machine, which can reduce the production costs per unit. And each hour 15000 zhang's speed the XL105-P compared to flip printing presses, the new 18000 zhang/hours of speed the XL105-P flip printing machine productivity increases on the overall about 20%, is by far the most efficient a double-sided turn transformation offset printing machine. "In the flip printing mode the speed reached 18000 zhang/hours of new speed the XL105, is we to market a response to lean production requirements," responsible for sustainable StephanPlenz said total of Heidelberg. "We offer our customers the optimization of process and product, can achieve maximize productivity, and seamless integration to customers can work processes. The exploration of the countless times we found to make our customers to further expand the competitive advantage of the methods, and accordingly developed the optimal solutions."
New flip printing and paper receiver with optimization design of paper control, achieve higher speed the XL105 production speed in flip printing mode printing speed can reach each hour 18000 zhang, such fast, stable production speed is the result of many technology innovation. This includes new flip printing and paper receiver design, and a modified paper control system. The improved storage roller and flip roller adopts new clamp ampere diao tooth system, improve the bit of paper strength, ensure that even in high speed also can realize accurate alignment. Paper receiver system equipped with an expansion module, including new CleanStar technology, support more efficient powder spraying a row device, maximum limit reduced the printing press spray powder quantity of splash around. Printing operations personnel only through the high performance Prinect Press Center control station input three parameters, such as their thickness, paper length and that paper width, complete the whole printing machine Settings. Britain's first user sure its extraordinary stability and quality British printing company Sterling from November 2011 began using the middle with Cut Star and printed in the machine computer Control system (Inpress Control), and in the flip printing mode speed up to 18000 zhang/hour of the XL105 ten color printing machine speed, their stability and quality of equipment very satisfied. Sterling's headquarters is in Kate spirit is Kettering, it is to provide comprehensive service printing company, employees 170 people, to provide fast, high quality service is known. Our customers are mainly from the industry, government and education institutions. "We hope to provide the best service, therefore wants to hire the best employees, introduces the most advanced machinery and technology," Sterling common all Steve and John Pizzey said. The company was established in 1990, in the past four years the scale in 80%, and investment more than 9 million pounds (approximates to 10.5 million euro). In 2008, the first global Heidelberg Sterling installation with Cutstar (cutting star) function of the XL105 ten color flip printing machine. Pizzey brother this machine is very satisfied, three months after they ordered the same type of printer machine. "Our rapid development means that we need to make a quick break through strength, further improve our productivity, shorten delivery time," John Pizzey said. As the first to use in flip printing speed under the mode of 18000 copies per hour speed the XL105 users, we first in veith los Hector factory with their own printing a live on the comprehensive test, and the testing result is very satisfied, "John Pizzey then said." Since the machine put into production, we have increased the productivity of more than 20%, compared with other printing company won the huge competitive advantage. We also with the printed printing workflow software to realize the quick delivery, "StevePizzey certainly. All before printing equipment, such as two sets of super CtP system, and printing equipment, such as starr TD94 folding machine and Paula cutting system, all have to print the integration process.
Heidelberg color printer in many fields of market share to flip over 80%, is arguably the market leader in multiple color group in turn printing machine, with the SM102 Heidelberg speed and speed the XL105 etc model occupied more than 80% of the market share, is the undisputed market leader. Heidelberg has been in the top of the performance of a series of developing XL, to ensure that the optimal solutions to satisfy all kinds of customers' requirements.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
2012 drew ba during the exhibition, the Heidelberg group (Heidelberg) will publicly display in the flip printing mode printing speed up to 18000 zhang/hours of speed the XL105 printing machine. The printing presses are targeted hope realizing lean production printing company. In bashan on it will show druid in lean manufacturing (HEI Productivity) classification the theme of the commercial printing area to display. Batch production first printing machine has identified in 2012 will be July delivery. So far, Heidelberg in large commercial printing company's top performance product combination to get further expansion, the company every year to printing more than 40 million copies, feature up to 60 million, and their capacity bottlenecks have experience greatly. In the past, such printing machine's top speed is 15000 zhang/hour. Through a go finish double-sided printing paper, combined with the highest automation and extremely convenient operation, print production become more economic and effective, greatly improving the business printing the competition ability of the enterprise. This type of high-performance printer user can either in don't improve the human cost based on the increase in production capacity, or keep existing production capacity in based on the number of reduce machine, which can reduce the production costs per unit. And each hour 15000 zhang's speed the XL105-P compared to flip printing presses, the new 18000 zhang/hours of speed the XL105-P flip printing machine productivity increases on the overall about 20%, is by far the most efficient a double-sided turn transformation offset printing machine. "In the flip printing mode the speed reached 18000 zhang/hours of new speed the XL105, is we to market a response to lean production requirements," responsible for sustainable StephanPlenz said total of Heidelberg. "We offer our customers the optimization of process and product, can achieve maximize productivity, and seamless integration to customers can work processes. The exploration of the countless times we found to make our customers to further expand the competitive advantage of the methods, and accordingly developed the optimal solutions."
New flip printing and paper receiver with optimization design of paper control, achieve higher speed the XL105 production speed in flip printing mode printing speed can reach each hour 18000 zhang, such fast, stable production speed is the result of many technology innovation. This includes new flip printing and paper receiver design, and a modified paper control system. The improved storage roller and flip roller adopts new clamp ampere diao tooth system, improve the bit of paper strength, ensure that even in high speed also can realize accurate alignment. Paper receiver system equipped with an expansion module, including new CleanStar technology, support more efficient powder spraying a row device, maximum limit reduced the printing press spray powder quantity of splash around. Printing operations personnel only through the high performance Prinect Press Center control station input three parameters, such as their thickness, paper length and that paper width, complete the whole printing machine Settings. Britain's first user sure its extraordinary stability and quality British printing company Sterling from November 2011 began using the middle with Cut Star and printed in the machine computer Control system (Inpress Control), and in the flip printing mode speed up to 18000 zhang/hour of the XL105 ten color printing machine speed, their stability and quality of equipment very satisfied. Sterling's headquarters is in Kate spirit is Kettering, it is to provide comprehensive service printing company, employees 170 people, to provide fast, high quality service is known. Our customers are mainly from the industry, government and education institutions. "We hope to provide the best service, therefore wants to hire the best employees, introduces the most advanced machinery and technology," Sterling common all Steve and John Pizzey said. The company was established in 1990, in the past four years the scale in 80%, and investment more than 9 million pounds (approximates to 10.5 million euro). In 2008, the first global Heidelberg Sterling installation with Cutstar (cutting star) function of the XL105 ten color flip printing machine. Pizzey brother this machine is very satisfied, three months after they ordered the same type of printer machine. "Our rapid development means that we need to make a quick break through strength, further improve our productivity, shorten delivery time," John Pizzey said. As the first to use in flip printing speed under the mode of 18000 copies per hour speed the XL105 users, we first in veith los Hector factory with their own printing a live on the comprehensive test, and the testing result is very satisfied, "John Pizzey then said." Since the machine put into production, we have increased the productivity of more than 20%, compared with other printing company won the huge competitive advantage. We also with the printed printing workflow software to realize the quick delivery, "StevePizzey certainly. All before printing equipment, such as two sets of super CtP system, and printing equipment, such as starr TD94 folding machine and Paula cutting system, all have to print the integration process.
Heidelberg color printer in many fields of market share to flip over 80%, is arguably the market leader in multiple color group in turn printing machine, with the SM102 Heidelberg speed and speed the XL105 etc model occupied more than 80% of the market share, is the undisputed market leader. Heidelberg has been in the top of the performance of a series of developing XL, to ensure that the optimal solutions to satisfy all kinds of customers' requirements.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Tuesday, January 10, 2012
Printing machinery manufacturing is the foundation of the development of the printing industry - Printing in China | Book Printing
http://www.printing-in-china.cn/shownews.asp?id=2062
Printing machinery manufacturing is the foundation of the development of the printing industry, for the cultural industry and the development of the printing industry has double construction significance. After 20 years of rapid development, China's current printing machinery manufacturing most of the leading product has already changed to industrialization, according to statistics, by 2010, printing equipment manufacturing enterprises in China in more than 600, annual output value of 17.5 billion yuan RMB, the early than the "eleventh five-year plan" (2006) 13 billion yuan of total 34.6% growth, at the same time, the product quality and technology innovation ability also achieved greatly ascend.
In 2011, the new "1025" plan is mainly aimed at the present situation of the printing industry and the existing problems, and put forward the printing "1025" period of development plan of the strategic direction and goal of construction. According to the "1025" planning, China plans to "1025" printing gross industrial output value at the end of more than 1.1 trillion yuan, to become the world's second largest printing superpower. In printing machinery manufacturing industry specific, "1025" planning, points out that the key to improve product digital, intelligent and automation level, realize the upgrade of traditional products, to green, energy saving, environmental protection request, the key development paper tension control system, automatic alignment system features and core technology; Encourage printing enterprise USES green environmental protection flexible printing technology, support the printing equipment manufacturing enterprise continue to research and development the flexible printing and related equipment.
Face of the new period in the printing industry construction task, also for printing machinery manufacturing industry has brought new historical opportunity of development. As a leading global provider of industrial automation supplier-Taiwan as a group has a variety of power electronics and control technology development experience, and various performance leading products and technology solutions, and aiming at China printing JiXieYe technology upgrading Taiwan as a group adjust measures to local conditions to promote diversity solutions.
According to the present JiXieYe printing on high-end printing machinery (such as: high-end drum paper offset printing presses, multiple color flexible printing, multicolor gravure machine etc), and high-end after printing equipment (such as: high-end linkage production line, die-cutting machine and hot stamping machine, automatic cutting line etc) tendency, especially for high-end, intelligent printing machine electronic axis (without shaft) transmission system, frequency conversion and LengTang printing technology and demand, Taiwan as a group provided a series of solutions. For example, in die cutting machine, die cutting machine asked to send mode axis and die cutting shaft to follow the gender is good, and synchronize high requirements, the sets of A2 servo system, system in synchronous follow area has outstanding performance, follow characteristics, in the family from the synchronous follow when can be done completely without shaft transmission, taken no phase between behind, for the customer provides an intelligent solution. In gravure printing, the inverter control the tension of the system needs to achieve the effect of energy saving, and better performance to price ratio, the use of Taiwan came to the constant tension control VE series frequency converter, through the inverter control of motor automatically realize the purpose of tension constant printing presses, the whole application has convenient adjustment and the characteristics of high performance to price ratio.
With "1025" during China printing machinery industry whole upgrade Lord, Taiwan as a group will integrate the control, motion, drive, transmission, safe electricity five kinds of products, one pace reachs the designated position to meet customer demand automation; At the same time, a perfect pre-sale consultation of iws, service and customized solutions, for printing machinery manufacturing clients to create economic interests and enhance competitiveness.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Printing machinery manufacturing is the foundation of the development of the printing industry, for the cultural industry and the development of the printing industry has double construction significance. After 20 years of rapid development, China's current printing machinery manufacturing most of the leading product has already changed to industrialization, according to statistics, by 2010, printing equipment manufacturing enterprises in China in more than 600, annual output value of 17.5 billion yuan RMB, the early than the "eleventh five-year plan" (2006) 13 billion yuan of total 34.6% growth, at the same time, the product quality and technology innovation ability also achieved greatly ascend.
In 2011, the new "1025" plan is mainly aimed at the present situation of the printing industry and the existing problems, and put forward the printing "1025" period of development plan of the strategic direction and goal of construction. According to the "1025" planning, China plans to "1025" printing gross industrial output value at the end of more than 1.1 trillion yuan, to become the world's second largest printing superpower. In printing machinery manufacturing industry specific, "1025" planning, points out that the key to improve product digital, intelligent and automation level, realize the upgrade of traditional products, to green, energy saving, environmental protection request, the key development paper tension control system, automatic alignment system features and core technology; Encourage printing enterprise USES green environmental protection flexible printing technology, support the printing equipment manufacturing enterprise continue to research and development the flexible printing and related equipment.
Face of the new period in the printing industry construction task, also for printing machinery manufacturing industry has brought new historical opportunity of development. As a leading global provider of industrial automation supplier-Taiwan as a group has a variety of power electronics and control technology development experience, and various performance leading products and technology solutions, and aiming at China printing JiXieYe technology upgrading Taiwan as a group adjust measures to local conditions to promote diversity solutions.
According to the present JiXieYe printing on high-end printing machinery (such as: high-end drum paper offset printing presses, multiple color flexible printing, multicolor gravure machine etc), and high-end after printing equipment (such as: high-end linkage production line, die-cutting machine and hot stamping machine, automatic cutting line etc) tendency, especially for high-end, intelligent printing machine electronic axis (without shaft) transmission system, frequency conversion and LengTang printing technology and demand, Taiwan as a group provided a series of solutions. For example, in die cutting machine, die cutting machine asked to send mode axis and die cutting shaft to follow the gender is good, and synchronize high requirements, the sets of A2 servo system, system in synchronous follow area has outstanding performance, follow characteristics, in the family from the synchronous follow when can be done completely without shaft transmission, taken no phase between behind, for the customer provides an intelligent solution. In gravure printing, the inverter control the tension of the system needs to achieve the effect of energy saving, and better performance to price ratio, the use of Taiwan came to the constant tension control VE series frequency converter, through the inverter control of motor automatically realize the purpose of tension constant printing presses, the whole application has convenient adjustment and the characteristics of high performance to price ratio.
With "1025" during China printing machinery industry whole upgrade Lord, Taiwan as a group will integrate the control, motion, drive, transmission, safe electricity five kinds of products, one pace reachs the designated position to meet customer demand automation; At the same time, a perfect pre-sale consultation of iws, service and customized solutions, for printing machinery manufacturing clients to create economic interests and enhance competitiveness.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Monday, January 9, 2012
For small publishers of article 9 digital Suggestions | Book Printing - Gold Printing Group
http://www.goldprinting.cc/shownews.asp?id=2026
Recently, a fact becomes increasingly clear: publishers should terminal consumer rather than retailers as their main customers. The situation than the publishers are expected to much faster, and it makes them feel very nerve-wracking. In books published in the field, for this kind of mode based on the impact of the retail release has continued for several years, this is in be change and retail network caused by the change of consumer reading habits of being under the stimulus. And the appearance of digital publication is also accelerates the the process.
Digital publishing a development path lies in the cloud publishing field, and do everything possible to achieve and all the direct link with readers.
For the small publishers, a global change often brings a troubled, can't control of the situation. We want to build a vertical community. For our customers to create a platform, to expand our business. But the digital is vast engineering, not all publishers can copy from and landon, o house of the path of the development. In this increasingly global industry, these small industry participants to how to choose appropriate strategy to respond to the global instability?
Of course, in Britain and the United States, also have such a group of companies, they also because the scale small and face the same challenges, but at least they can and those larger competitors share together with a worldwide market, this will be for them to bring a lot of important advantages, such as related to the sale of the right and the global audience group. But for from the English market (such as the Netherlands and small country) publications colleagues for, and how to?
Many publishers and digital publishing manager as this issue published opinions of his own, a common theme in all final boil down to: choose your battlefield. In your annual income is far lower than the langdon bookstore marketing budget, you can't on the same level with the legitimate.
Therefore, I for small companies gave the advice has the following 9:
Focus on building a the good performance of digital infrastructure, so that you can quickly published various formats of books, and can support you will face various channels issue.
Look for can help you to expand the scale of suitable partner, and gradually form clients ideas.
Unless you to App application products profit very confident, otherwise the cautious investment, because you are not likely to earn back your investment.
To make as much use of every distribution channels to get to what you can reach as much as possible of the user, even the smallest audience also can't let go.
First to strive for quick profits-not just in digital given to investment. In order to ensure that the enterprise can continue to live, and your eyes shall have been tight stare at a financial the bottom line.
Even for those for the English language for the small country, there is also an international market, you need to do is put your books show up.
Make sure you want to do and needs to do a job, have the right to use the right of related.
Amazon, Google and apple, all of you in the local market a threat. But they also provides you with a global audience for the best chance.
As far as possible to become you currently have and are going to have the best partner of the authors.
This information can simply enrichment is: don't wait until all happened only start action. Begun a digital, began to learn knowledge. This is a few years ago I had listened to renounce, but unfortunately, this just is many publishers have not fully comprehend the truth.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Recently, a fact becomes increasingly clear: publishers should terminal consumer rather than retailers as their main customers. The situation than the publishers are expected to much faster, and it makes them feel very nerve-wracking. In books published in the field, for this kind of mode based on the impact of the retail release has continued for several years, this is in be change and retail network caused by the change of consumer reading habits of being under the stimulus. And the appearance of digital publication is also accelerates the the process.
Digital publishing a development path lies in the cloud publishing field, and do everything possible to achieve and all the direct link with readers.
For the small publishers, a global change often brings a troubled, can't control of the situation. We want to build a vertical community. For our customers to create a platform, to expand our business. But the digital is vast engineering, not all publishers can copy from and landon, o house of the path of the development. In this increasingly global industry, these small industry participants to how to choose appropriate strategy to respond to the global instability?
Of course, in Britain and the United States, also have such a group of companies, they also because the scale small and face the same challenges, but at least they can and those larger competitors share together with a worldwide market, this will be for them to bring a lot of important advantages, such as related to the sale of the right and the global audience group. But for from the English market (such as the Netherlands and small country) publications colleagues for, and how to?
Many publishers and digital publishing manager as this issue published opinions of his own, a common theme in all final boil down to: choose your battlefield. In your annual income is far lower than the langdon bookstore marketing budget, you can't on the same level with the legitimate.
Therefore, I for small companies gave the advice has the following 9:
Focus on building a the good performance of digital infrastructure, so that you can quickly published various formats of books, and can support you will face various channels issue.
Look for can help you to expand the scale of suitable partner, and gradually form clients ideas.
Unless you to App application products profit very confident, otherwise the cautious investment, because you are not likely to earn back your investment.
To make as much use of every distribution channels to get to what you can reach as much as possible of the user, even the smallest audience also can't let go.
First to strive for quick profits-not just in digital given to investment. In order to ensure that the enterprise can continue to live, and your eyes shall have been tight stare at a financial the bottom line.
Even for those for the English language for the small country, there is also an international market, you need to do is put your books show up.
Make sure you want to do and needs to do a job, have the right to use the right of related.
Amazon, Google and apple, all of you in the local market a threat. But they also provides you with a global audience for the best chance.
As far as possible to become you currently have and are going to have the best partner of the authors.
This information can simply enrichment is: don't wait until all happened only start action. Begun a digital, began to learn knowledge. This is a few years ago I had listened to renounce, but unfortunately, this just is many publishers have not fully comprehend the truth.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Sunday, January 8, 2012
IPad era after digital publishing printing how to keep up with the trend - Printing in China | Book Printing
http://www.printing-in-china.cn/shownews.asp?id=2060
Recently, the future of the digital publication in new form uncertainty: mobile reading continued growth, once scene infinite electronic reader into a price cut vortex, and as a representative of the iPad tablet computer sprung up, and the forced electronic reading further from paper books of the formation of the age old interest. The future of electronic reading will build on a scale infinite, action to unlimited canvas.
Flip is no longer provisions action
May never have the concept of text. IPad sold, when the United States is an engaging ebooks layout design software engineer Craig hogsmeade said. Maybe cell phones and electronic reader was largely retained the similar to paper prints content flow, iPad times books, there is no need to use paper books of physical style to design, it is a waste of the potential of the tablet computer.
A concise and practical may be: when you read a novel in the iPad, will through the touch screen, the transversal select chapters to directory, the vertical section of the access to the content. The two directions of the extensions are endless.
Endless whether a large canvas expedites the endless work? At least one thing is certain: the greater the size of your book, the suitable for electronic publishing content. The paper books DaTiLiang from price to transportation, and looking for shelter itself, can be you buy it trouble, ebook, it is not a problem.
Digital books for value added
No experience of reading ebooks than design more exciting. The vice President LiuJiang grand literature in accepting our newspaper reporters. LiuJiang told reporters, grand literature operation platform the cloud in the product experience book city made a lot of exploration, for mobile phone, electronic reader, tablet computer reading terminal, the cloud trying to introduce more close to the book city users demand improvement plan. For example, how in tablet PC canvas to achieve the best effect of graphic mix row, how to compatible support in the format of the file, and how to more fluid and appropriate to achieve the video, voice, multimedia and the text content interaction, in order to improve the user experience of reading.
The most important is through the digital means for a book value. A book of the paper and electronic version of the difference between big to change a form is not possible, but is equivalent to another book. Imagine, when you are reading a novel on the tablet computer, you can see the author interviews in an appendix video, experts interpretation, dynamic latest comments, etc.
Beat the paper books not electronic reader, not mobile phones, also not tablet computer, but human nature itself. LiuJiang firmly believe, eager to more comfortable and convenient reading experience is all instinct. The emergence of the mobile Internet redefined the people use the Internet gold time, after wake up, before going to bed, on the subway, stuck in traffic on the way... A fragment of peak time to be read. This is a to redefine the reader and the content in the form of interaction opportunity, also a by readers to control the opportunity of content. People will see new narrative form in the electronic canvas rise.
Read the book content to pieces
In traditional publishers, iPad cast shock wave are not fully arrived, but some people feel that it has the wide application of the content will be put forward higher demand subdivision.
China encyclopedia press constant technical director says to the reporter, at present a lot of traditional press digital engineering only stay in the original copy of the paper publications to electronic reading on the platform. This type of scanning work is set up enough content resources, but it is a kind of passive response, no figure for readers to put down the zero distance service.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Recently, the future of the digital publication in new form uncertainty: mobile reading continued growth, once scene infinite electronic reader into a price cut vortex, and as a representative of the iPad tablet computer sprung up, and the forced electronic reading further from paper books of the formation of the age old interest. The future of electronic reading will build on a scale infinite, action to unlimited canvas.
Flip is no longer provisions action
May never have the concept of text. IPad sold, when the United States is an engaging ebooks layout design software engineer Craig hogsmeade said. Maybe cell phones and electronic reader was largely retained the similar to paper prints content flow, iPad times books, there is no need to use paper books of physical style to design, it is a waste of the potential of the tablet computer.
A concise and practical may be: when you read a novel in the iPad, will through the touch screen, the transversal select chapters to directory, the vertical section of the access to the content. The two directions of the extensions are endless.
Endless whether a large canvas expedites the endless work? At least one thing is certain: the greater the size of your book, the suitable for electronic publishing content. The paper books DaTiLiang from price to transportation, and looking for shelter itself, can be you buy it trouble, ebook, it is not a problem.
Digital books for value added
No experience of reading ebooks than design more exciting. The vice President LiuJiang grand literature in accepting our newspaper reporters. LiuJiang told reporters, grand literature operation platform the cloud in the product experience book city made a lot of exploration, for mobile phone, electronic reader, tablet computer reading terminal, the cloud trying to introduce more close to the book city users demand improvement plan. For example, how in tablet PC canvas to achieve the best effect of graphic mix row, how to compatible support in the format of the file, and how to more fluid and appropriate to achieve the video, voice, multimedia and the text content interaction, in order to improve the user experience of reading.
The most important is through the digital means for a book value. A book of the paper and electronic version of the difference between big to change a form is not possible, but is equivalent to another book. Imagine, when you are reading a novel on the tablet computer, you can see the author interviews in an appendix video, experts interpretation, dynamic latest comments, etc.
Beat the paper books not electronic reader, not mobile phones, also not tablet computer, but human nature itself. LiuJiang firmly believe, eager to more comfortable and convenient reading experience is all instinct. The emergence of the mobile Internet redefined the people use the Internet gold time, after wake up, before going to bed, on the subway, stuck in traffic on the way... A fragment of peak time to be read. This is a to redefine the reader and the content in the form of interaction opportunity, also a by readers to control the opportunity of content. People will see new narrative form in the electronic canvas rise.
Read the book content to pieces
In traditional publishers, iPad cast shock wave are not fully arrived, but some people feel that it has the wide application of the content will be put forward higher demand subdivision.
China encyclopedia press constant technical director says to the reporter, at present a lot of traditional press digital engineering only stay in the original copy of the paper publications to electronic reading on the platform. This type of scanning work is set up enough content resources, but it is a kind of passive response, no figure for readers to put down the zero distance service.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Thursday, January 5, 2012
Printing and environmental protection is global printing industry sustainable development theme
In today's world wide variety of greening prints, not only reflect > element makes more civilized human printing, the more progress, more harmonious life interest, and vivid explanation of human life to death by the indissoluble bond with printing. The printing industry in spread human knowledge civilization, improve the life quality of the people, and promote the industry technology development, constructing the modern culture industry or the history of one thousand years after the deduction to the green environmental protection innovation. In the environmental protection field of view, the author thinks that Chinese the development of the printing industry direction can be summed up as follows.
A, relying on international standards, lead the market development
The new century initial, environmental protection becomes the focus of continued global. In the printing industry, IS014001 the rise of international environmental management system, the state environmental protection printing standard/printing environment mark the start of technology, "food safety" to packaging and printing legal level requirements, and even by the Shanghai science and technology commission, the Shanghai economic committee of Shanghai news and information, ChuBanJu jointly organized the 2009 Shanghai international printing week "puts forward" development, digital, science and technology, environmental protection, creative "to deduce" printing market future "theme, all show the green printing, environmental protection packing has become the main stream of the development of printing industry. In printing buyers use environmental protection public production prints increasingly focus on the market environment, printing enterprise in the competition to win, to get more market share, the more lucrative product profit, only rely on the international standard, positive attention and active to adopt new technology, new technology, especially the environmental protection material and printing ink, can truly according to market the guide, realize the user "safety, health, environmental protection" goal, can truly rely on improving energy efficiency and reduce emissions, prevent air pollution, prevent water pollution, the noise pollution to printing enterprise in market demand go before, leading the green printing the development of the market.
From domestic go in the environmental protection at the top of the advanced printing enterprises, these the success of an enterprise development and market development, first is forecast and understanding to the international printing of printing products of environmental protection buyer potential demand, established to prevent each developed country through the environmental protection kinds of standards to establish technical barriers, trade barriers of exclusive measures, from product planning, process design, material selection and environmental protection product description and other aspects of all answer, so as to achieve in the international and domestic market initiative, product high added value and returns from the same core competitiveness of the enterprise, also began to lead the development direction of printing products market, forming a sustainable development situation.
Second, sustained technology innovation, improving the environmental value
In the global environmental protection concept penetrated the heart of the people, the integration of the people under the background of trip, as a typical market demand and technical development of the printing industry to promote only discern the consumer to specific needs of green products, conform to the trend of the printing product environmental protection, and the use of advanced environmental printing equipment and materials, to the accumulation of technology in the system in accordance with the environmental protection goal of printing the continued technology innovation, improvement in the environmental value printed products, for printing enterprise sustainable development create conditions.
Printing enterprise technology innovation must continue from the product demand, equipment technology, material selection and working standard four aspects. In the product demand, printing enterprise must use new vision from international printing in the market to search for business and opportunity, the research and development for a specific industry environmental protection of printed materials, competition and high-end food order government pharmaceutical packaging order, form high environmental protection enterprise product service mechanism. In equipment technology, printing enterprise can in time to introduce some new equipment and new technologies, such as environmental protection performance optimization of flexo printing technology, no film since CTP, technology, can also through the reform of traditional technology and technology promotion to enhance environmental protection function of traditional technology, such as offset technology from alcohol education version to no alcohol education version, from the water to have no water printing printing; Post-press processing from the hot iron to LengTang, coated glazing from volatile adhesive, water-borne glue, oily glazing to the water-borne glazing. In material selection, printing enterprise need to pay attention to the international domestic printing materials environmental protection development trend, and grasp the development trend and improve the occasion to build up the printing product environmental protection properties, such as printing material in selection of the fluorescent whitening agent of paper or composite materials, choose reusable and environmental protection material; Printing ink choose less harmful or harmless water-based ink or soy ink, print material choose from flush plate, education version liquid choose low alcohol or no alcohol education version liquid, car wash water and other complementary material choose low pollution or no pollution materials and so on.
(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
A, relying on international standards, lead the market development
The new century initial, environmental protection becomes the focus of continued global. In the printing industry, IS014001 the rise of international environmental management system, the state environmental protection printing standard/printing environment mark the start of technology, "food safety" to packaging and printing legal level requirements, and even by the Shanghai science and technology commission, the Shanghai economic committee of Shanghai news and information, ChuBanJu jointly organized the 2009 Shanghai international printing week "puts forward" development, digital, science and technology, environmental protection, creative "to deduce" printing market future "theme, all show the green printing, environmental protection packing has become the main stream of the development of printing industry. In printing buyers use environmental protection public production prints increasingly focus on the market environment, printing enterprise in the competition to win, to get more market share, the more lucrative product profit, only rely on the international standard, positive attention and active to adopt new technology, new technology, especially the environmental protection material and printing ink, can truly according to market the guide, realize the user "safety, health, environmental protection" goal, can truly rely on improving energy efficiency and reduce emissions, prevent air pollution, prevent water pollution, the noise pollution to printing enterprise in market demand go before, leading the green printing the development of the market.
From domestic go in the environmental protection at the top of the advanced printing enterprises, these the success of an enterprise development and market development, first is forecast and understanding to the international printing of printing products of environmental protection buyer potential demand, established to prevent each developed country through the environmental protection kinds of standards to establish technical barriers, trade barriers of exclusive measures, from product planning, process design, material selection and environmental protection product description and other aspects of all answer, so as to achieve in the international and domestic market initiative, product high added value and returns from the same core competitiveness of the enterprise, also began to lead the development direction of printing products market, forming a sustainable development situation.
Second, sustained technology innovation, improving the environmental value
In the global environmental protection concept penetrated the heart of the people, the integration of the people under the background of trip, as a typical market demand and technical development of the printing industry to promote only discern the consumer to specific needs of green products, conform to the trend of the printing product environmental protection, and the use of advanced environmental printing equipment and materials, to the accumulation of technology in the system in accordance with the environmental protection goal of printing the continued technology innovation, improvement in the environmental value printed products, for printing enterprise sustainable development create conditions.
Printing enterprise technology innovation must continue from the product demand, equipment technology, material selection and working standard four aspects. In the product demand, printing enterprise must use new vision from international printing in the market to search for business and opportunity, the research and development for a specific industry environmental protection of printed materials, competition and high-end food order government pharmaceutical packaging order, form high environmental protection enterprise product service mechanism. In equipment technology, printing enterprise can in time to introduce some new equipment and new technologies, such as environmental protection performance optimization of flexo printing technology, no film since CTP, technology, can also through the reform of traditional technology and technology promotion to enhance environmental protection function of traditional technology, such as offset technology from alcohol education version to no alcohol education version, from the water to have no water printing printing; Post-press processing from the hot iron to LengTang, coated glazing from volatile adhesive, water-borne glue, oily glazing to the water-borne glazing. In material selection, printing enterprise need to pay attention to the international domestic printing materials environmental protection development trend, and grasp the development trend and improve the occasion to build up the printing product environmental protection properties, such as printing material in selection of the fluorescent whitening agent of paper or composite materials, choose reusable and environmental protection material; Printing ink choose less harmful or harmless water-based ink or soy ink, print material choose from flush plate, education version liquid choose low alcohol or no alcohol education version liquid, car wash water and other complementary material choose low pollution or no pollution materials and so on.
(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Under the practical application of ink | Book Printing - Gold Printing Group
Ink is luminous ree activate alkaline acid salt aluminum, silicate high-tech spontaneous light products. Their outstanding characteristic is to absorb the light absorption stored various lights above 10-30 minutes after the visible light can be in the dark night and day for 10 to 12 or more hours of light, the light intensity and duration is traditional Ins luminous material of 30 to 50 times, and unlimited time cycle use, do not contain any radioactive elements, silk screen best effect, 80-120 mesh. Can work on various materials.
Yellow, red, blue, blue, purple five varieties of luminous pigment.
The wide application of luminous pigment:
Mark location: will this material used in electric switch, remote control board, wall switch, plug, lock, portable torch, the handle, armrest, fire fighting equipment, fire alarm, life-saving equipment, and so on, can be labeled the existing location, convenient use.
Prevent danger happening: the material used for signal, note writing, emergency evacuation passageway and subway station, underground passage, human engineering, kara OK hall, ballroom, FangYingTing, supermarket sells, hospital, railway station, airport, dock, shelter, etc can rise to prevent danger happening role.
Building: the material coating on the building walls, ceramic tile, the elevator surface, Bridges, roads, road signs such as nails, roadblocks, port, outdoor advertising, etc are not only beautiful and practical value. Other: such as handicraft, amber, crystal sand, glass, picture; Toys, plastic toys, puzzles, blocks; Clothing, shoes and hats, gloves, uniforms, t-shirts, t-shirts, helmet, printing accessories; Calendar, fishing tackle, etc.
Various emitting light pigment has its best use scope and conditions of use, please refer to the specific instructions or light pigment technical consultation.
Cautions:
The pigment more than major, when using, pay attention to blending.
Should be stored in ventilation, dry environment, pay attention to moistureproof, not a finished using light-emitting pigment should pay attention to seal preservation.
Metal material on the luminous property have great influence, should try to avoid contact with metal materials.
Shine pigment packing, transportation and storage:
Packing: in plastic bags for inner packing products waterproof, and desiccant; The outer packing use cardboard boxes or drum packaging, can also according to the customer request, the other forms of packaging.
Transportation: transportation from mechanical collision, extrusion, keep packing integrity, and prevent weathered, not stand on his head.
Storage: should be stored in ventilation, dry environment, pay attention to moistureproof.
(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Yellow, red, blue, blue, purple five varieties of luminous pigment.
The wide application of luminous pigment:
Mark location: will this material used in electric switch, remote control board, wall switch, plug, lock, portable torch, the handle, armrest, fire fighting equipment, fire alarm, life-saving equipment, and so on, can be labeled the existing location, convenient use.
Prevent danger happening: the material used for signal, note writing, emergency evacuation passageway and subway station, underground passage, human engineering, kara OK hall, ballroom, FangYingTing, supermarket sells, hospital, railway station, airport, dock, shelter, etc can rise to prevent danger happening role.
Building: the material coating on the building walls, ceramic tile, the elevator surface, Bridges, roads, road signs such as nails, roadblocks, port, outdoor advertising, etc are not only beautiful and practical value. Other: such as handicraft, amber, crystal sand, glass, picture; Toys, plastic toys, puzzles, blocks; Clothing, shoes and hats, gloves, uniforms, t-shirts, t-shirts, helmet, printing accessories; Calendar, fishing tackle, etc.
Various emitting light pigment has its best use scope and conditions of use, please refer to the specific instructions or light pigment technical consultation.
Cautions:
The pigment more than major, when using, pay attention to blending.
Should be stored in ventilation, dry environment, pay attention to moistureproof, not a finished using light-emitting pigment should pay attention to seal preservation.
Metal material on the luminous property have great influence, should try to avoid contact with metal materials.
Shine pigment packing, transportation and storage:
Packing: in plastic bags for inner packing products waterproof, and desiccant; The outer packing use cardboard boxes or drum packaging, can also according to the customer request, the other forms of packaging.
Transportation: transportation from mechanical collision, extrusion, keep packing integrity, and prevent weathered, not stand on his head.
Storage: should be stored in ventilation, dry environment, pay attention to moistureproof.
(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Tuesday, January 3, 2012
printing in china | book printing china - With the security printing paper
http://www.printing-in-china.cn/shownews.asp?id=2057
1. The copy paper
The copy is to prevent the original copy machine and the original after a completely different products, can prevent forgery. The purpose is to let the copy of the copy of the text, graphics, information content becomes completely cannot identify state. According to the anti-counterfeiting technology can be divided into the decorative pattern of paper printing hidden text, decorative pattern, design of the copy paper; Use the color characteristics of the copy paper; Contain light color material and copy paper; Contains color-changed materials and the copy paper; Contains of organic material of the light copy paper; Contain fluorescent substance of the copy paper; Using light of the principle of the flood launch copy paper and use of polarized light and copy paper.
2. Magnetic anti-counterfeiting paper
The principle of magnetic anti-counterfeiting paper is on paper base material of magnetically coated magnetic powder, or in manufacturing paper will magnetic powder in a specific way to join pulp, so that the ChaoZao out paper with magnetic. This kind of magnetic paper in the parts of the magnetic powder to feel different from other common paper, especially with the metal by magnetic induction identification equipment or identifier, and different from other ordinary paper. Can be used to produce false trademark, anti-counterfeiting magnetic his card and high-grade packaging computer identification magnetic security labels, etc.
3. Thermal anti-counterfeiting paper
Thermal security is mainly will thermal paper material coating on paper and get on base, using thermal physical hot reversible change color characteristics to identify authenticity. Heat show color, cooling fade and repeated display characteristics. At present, thermal paper mainly has security liquid crystal and colorless dye two kinds big.
4. Digital ShuiYinZhi
Digital watermarking technology is to use the method of digital signal processing in the embedded in multimedia data concealed mark, the mark is usually not visible, only through the special detector or reader can extract. Can is text, owner of the ID code product, 2 d images, audio-visual audio information, random sequence, etc. Mainly used for copyright protection, identity identification, copy protection and media tracking, may also used for confidential communications, many language film system, access to the network media restrictions and additional information, divided into the visible watermarking and not visible watermarking two kinds. Visible watermarking can only be used for the image of the fixed place, is used to identify the ownership of the works; No visible watermarking for visual not visible, mainly for the identification of the right and track work belongs to the source of the works.
5. Photochromic anti-counterfeiting paper
The so-called photochromic certain characteristics is the light color changes, leave light go back to them; Photochromic anti-counterfeiting paper is containing these substances anti-counterfeiting paper. The existing photochromic anti-counterfeiting paper basically has two kinds: one is induced color anti-counterfeiting paper, this is the most widely used at present and the most mature technology, almost all the country's notes are adopting induced color ink printing currency anti-counterfeiting mark; The bank to identify, as long as the currency in uv lamp, can see that particular part anti-counterfeiting mark, leave the uv light source will not display. Another kind is the natural light to change color anti-counterfeiting paper, this paper color of light source is natural light, including general indoor light, and not just in the sun light. The security of the paper application more convenient, but is still remain to be improved.
6. Add QianWeiSi, color point of encryption security paper
This paper is in the process of anti-counterfeiting paper pulp with QianWeiSi or color point is made. This paper is the earliest form of security in paper pulp in add non-ferrous plant fiber, now commonly used has the following several kinds of forms:
(1) add color paper pulp in chemical fibre or fluorescent fiber, the former with the naked eye is on paper to see, the latter must be in the uv irradiation can appear below; The color with red, blue, orange is in the majority, form can be rough can fine, long or short.
(2) in the process will metal wire, surface of the plastic film gilded with silk, fluorescent metal wire, plating has to change the material optical thin film or magnetic materials insert paper layer, the silk thread on the copy process difficult to reproduce, and therefore, as a kind of effective anti-counterfeiting means is widely used.
(3) will have optical change function (such as fluorescence, shine or discolored) material, general is plastic film or metallic flake, make certain shapes such as round or polygonal pieces of paper scattered in layer; Its characteristic is with the naked eye can identify and copier hard to reproduce.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
1. The copy paper
The copy is to prevent the original copy machine and the original after a completely different products, can prevent forgery. The purpose is to let the copy of the copy of the text, graphics, information content becomes completely cannot identify state. According to the anti-counterfeiting technology can be divided into the decorative pattern of paper printing hidden text, decorative pattern, design of the copy paper; Use the color characteristics of the copy paper; Contain light color material and copy paper; Contains color-changed materials and the copy paper; Contains of organic material of the light copy paper; Contain fluorescent substance of the copy paper; Using light of the principle of the flood launch copy paper and use of polarized light and copy paper.
2. Magnetic anti-counterfeiting paper
The principle of magnetic anti-counterfeiting paper is on paper base material of magnetically coated magnetic powder, or in manufacturing paper will magnetic powder in a specific way to join pulp, so that the ChaoZao out paper with magnetic. This kind of magnetic paper in the parts of the magnetic powder to feel different from other common paper, especially with the metal by magnetic induction identification equipment or identifier, and different from other ordinary paper. Can be used to produce false trademark, anti-counterfeiting magnetic his card and high-grade packaging computer identification magnetic security labels, etc.
3. Thermal anti-counterfeiting paper
Thermal security is mainly will thermal paper material coating on paper and get on base, using thermal physical hot reversible change color characteristics to identify authenticity. Heat show color, cooling fade and repeated display characteristics. At present, thermal paper mainly has security liquid crystal and colorless dye two kinds big.
4. Digital ShuiYinZhi
Digital watermarking technology is to use the method of digital signal processing in the embedded in multimedia data concealed mark, the mark is usually not visible, only through the special detector or reader can extract. Can is text, owner of the ID code product, 2 d images, audio-visual audio information, random sequence, etc. Mainly used for copyright protection, identity identification, copy protection and media tracking, may also used for confidential communications, many language film system, access to the network media restrictions and additional information, divided into the visible watermarking and not visible watermarking two kinds. Visible watermarking can only be used for the image of the fixed place, is used to identify the ownership of the works; No visible watermarking for visual not visible, mainly for the identification of the right and track work belongs to the source of the works.
5. Photochromic anti-counterfeiting paper
The so-called photochromic certain characteristics is the light color changes, leave light go back to them; Photochromic anti-counterfeiting paper is containing these substances anti-counterfeiting paper. The existing photochromic anti-counterfeiting paper basically has two kinds: one is induced color anti-counterfeiting paper, this is the most widely used at present and the most mature technology, almost all the country's notes are adopting induced color ink printing currency anti-counterfeiting mark; The bank to identify, as long as the currency in uv lamp, can see that particular part anti-counterfeiting mark, leave the uv light source will not display. Another kind is the natural light to change color anti-counterfeiting paper, this paper color of light source is natural light, including general indoor light, and not just in the sun light. The security of the paper application more convenient, but is still remain to be improved.
6. Add QianWeiSi, color point of encryption security paper
This paper is in the process of anti-counterfeiting paper pulp with QianWeiSi or color point is made. This paper is the earliest form of security in paper pulp in add non-ferrous plant fiber, now commonly used has the following several kinds of forms:
(1) add color paper pulp in chemical fibre or fluorescent fiber, the former with the naked eye is on paper to see, the latter must be in the uv irradiation can appear below; The color with red, blue, orange is in the majority, form can be rough can fine, long or short.
(2) in the process will metal wire, surface of the plastic film gilded with silk, fluorescent metal wire, plating has to change the material optical thin film or magnetic materials insert paper layer, the silk thread on the copy process difficult to reproduce, and therefore, as a kind of effective anti-counterfeiting means is widely used.
(3) will have optical change function (such as fluorescence, shine or discolored) material, general is plastic film or metallic flake, make certain shapes such as round or polygonal pieces of paper scattered in layer; Its characteristic is with the naked eye can identify and copier hard to reproduce.(Gold Printing Group)
Book Printing
Printing in China
Notebooks Printing
Printing in China
Subscribe to:
Posts (Atom)